Description
Garmin GAP-26 Heated Pitot Tube with AOA, (Unregulated)
Like most heated probes, with the heated, unregulated version of the GAP 26, the heater runs full tilt anytime it is turned on.
Simply flip the heated pitot switch and the tube will heat up.
Notes:
- The pneumatic tubing for pitot pressure is the longer of the two tubes extending out of the probe.
- For heated probe installations where the installer desires to shorten the provided aluminum tubing, a minimum of 8 inches of aluminum tubing should remain between the probe and any transition to non-metallic tubing to protect the non-metallic tubing from excessive heat.
- For GAP 26 installation instructions please refer to the corresponding section of Garmin G3X installation manual.
Garmin part number: 010-010704-10
Pitot Mount Install Kit sold separately.
